1,Driven byservo motor;

2, The plates of both sides aer easyto adjust;

3, The block board is driven by the screw motor, automatically adjustable when database setup;

4, The paperfeedrodis straight slide rail for fixing and adjusting up and down, with high precision and no gap.

1. Alignthe paper . The rubber wheel can adjust the pressure and Angle

2, The drive beltand rubber wheel are pre-adjusted to the required Angle according to the size and thickness of the carton;

3, the pull gauge can be corrected on the left or right side

1, Press wheelsassembled left and right, accurately press the seconr and fourth fold line again;

2, Each set of wheelshas three pressure wheel, from thick to thin;

3, Use the cylinder device to remove the wheels if no need;

4, The wheelsadopt the linear guide screw adjustment structure, high stability and easy adjustment.

1, The folding knife is convenient to adjust the height to adapt to different cartons;

2. The pressing device on the middle plate can press the carton to avoid moving when the carton is formed;

3,New designed flap device, can effectively avoid damage to the box;

4, Two-stage turning structure is independently driven by servo motor, can be adjusted separately

1, Counts the carton and arranges it neatly into the press;

2, The upper and lower telescopic belt adjustment using electric screw structure;

3. Equipped with buffles and flap boards,Final correction forforming carton;

1, The front end of the convetor can be lifted with the patching device of the output part；

2, Pneumatic structure ;

3, Electric adjustment moves back and forthfor upper press belt.

Secondary crimping (pre-pressing-fine pressing)

Segmented crutches

Belt blocking and crimping device

Active air pressure upper belt

Electric adjustable belt telescopic

Plys

Three-layer, five-layer carton：A.B.C.E.AB.BC.EB.EE.ABC.BCB

Paper size

Max WXL：1650 X 1200mm

Min WXL：300 X 200mm

Machine speed

MAX.300m/min

Inch speed

20m/min

Feed way

Automatic continuous paper feeding

Machine size

20500 X 3000 X 2000mm（L X W X H）

Weight

≤22T