1. The servo motor drive controls the independent transmission. (VS other brand: normal motor )

2. The paper knife adopts tungsten steel cutter head, which will never wear out. (VS other brand: normal 35# material )

3. The paper knife adopts linear guide rail slider to achieve high-precision and high-sensitivity fine-tuning. (VS other brand: normal material )  

4. 7pcs of feed belts and could be adjusted separately.  (VS other brand: 6pcs)

3. Display and camera configuration,

4. Three sets of adjustable paper knives.

5. High strength special vibration motor, more smooth by vibrating paper  Smooth and stable.

6. Use suction and vibration motor to feed paper

7. Beef tendon to paper tape, 6 pieces.

8. High precision hexagon drive shaft, stable and efficient.

9. Large full-color display can be used to view the paper walking of the paper box

1. Correct the deviation caused by the paper products to improve the accuracy of the products

2. Equipped with a set of correction devices on the left and right sides

3. Equipped with imported Japanese Nita flat folding belt.

4. Equipped with remote control board(VS other brand:bottom control)

1. Long distance prefolding part, truly realize the carton to complete the first line of 180°, the third line of 135° prefolding; It is easy to open when the carton is filled with material.

2. Equipped with an inlet plane folding belt.

3.Multi-groove belt noiseless transmission structure.

4. Three groups of multifunctional inner plate structure.

5. The upper installation board is segmented and designed to make more personalized products with high flexibility.

6. Multi-function elongated design, segmented inner wall board, full All kinds of special box installation operation.

7. Remote control electric board(VS other brand:bottom control)

1. Modular design, using special aluminum type Material design to improve attachment installation and conversion time.

2. Equipped with 4 sets of high precision spring hook, high operation Precision and accuracy. (VS other brand:normal structure)

3. Equipped with imported plane folding belt.

4. The left and right outer plates are equipped with multifunctional outer folding belt and folding A knife.

5. The upper installation board is segmented to make it more personalized Product flexibility is high.

6.  Equipped with remote control board (VS other brand:bottom control)

7. Double register   (VS other brand:do not have )

1. The special design of the lower glue tank can accurately control the amount of glue ,Keep high speed running without throwing  glue.  Easy for  Assembling and disassembling, cleaning and maintenance .

2. The lower paste cylinder is equipped with two sets of paste cylinders for convenient operation. Save the time of adjusting the machine.

3. Equipped with remote control board (VS other brand:manual)  

1. The main motor adopts asynchronous servo motor precision drive, It has the advantages of no noise and long life. (VS other brand:normal motor)

2. The left and right folding belt  can adjust the speed alone, can In line with the multi-style adjustment operation, fast and convenient, so The box can be closed accurately.

3. Equipped with 2 sets of jackknife.Linear guides,  (VS other brand:normal screws)

4. using three groups of inner wall board running track, three boards can be installed and replaced by two Plate, middle plate can be flexibly disassembled, adapt to more different ruler Inch products.

5. French Hutchinson multi-groove belt drive

6. Equipped with remote control board (VS other brand:bottom control)

1. Adopt asynchronous servo drive (VS other brand:normal motor)

2. using Taiwan Panasonic photoelectric, counter. Can total Count or quantify.

3. PLC computer control, man-machine interface, front and rear speed Add and subtract synchronously.

4. Equipped with imported Japanese Nita flat folding belt.

5. Multi-groove belt independent transmission can be accelerated and decelerated separately Or reduce the paper gap, more stable paper.

6. The low and high angles of the lower belt are adjusted by screw wheel positioning.

7. Universal swing arm control screen, convenient no dead Angle operation.

8. The four sets of telescopic belts adopt linear guide  ways Sliding block design, flexible and convenient, efficient and easy. (VS other brand:normal pull rod)  

9. Equipped with remote control board (VS other brand:bottom control)

10. Pneumatic counting, telescopic and telescopic using linear guide rail back and forth adjustment (VS other brand:normal buckle)

1. Transmission frequency control, and the host can be proportional linkage.

2. Air pressure type after machine, can independently adjust the pressure, carton Can do moderate pressure, and make the product more perfect.

3. Conveyor  extension design, to ensure that the product  glue  and press longer.

4. The upper and lower transmission of the conveyor belt adopts the active device for conveying .The belt  runs synchronously.

50 The belt on the press bed can be moved back and forth and electrically adjusted.

6.  With pressure box auxiliary belt, can be left and right remote control adjustment section(VS other brand:manual)   7,Equipped with an all-edged sponge strap (VS other brand:no have)  

8. A device for pneumatic paper finishing (VS other brand:no have)

1. Cold glue spraysystem 3 guns(USD5120)

2.Back fold system（USD6000）

PLC seting

Produce 4/6 corner boxes.

MATERIAL

CARDBOARD，E.F.N corrugated

Box Type

One side

max:W×L：1100*800mmmm   min：130*100mm

Lock bottom

max: W×L：1050× 800mm   min：210× 120mm

Optional ：

4 corner

max：W×L：1050×780m   min：290× 180mm

6corner

max：W×L:1050×780mm   min：290× 270mm

Speed

MAX.400m/min

Size

15800 × 1800 × 1500mm LWH

Weight

8T

Power

30KW

DELIVERY

30 DAYS READY IN CHINA FACTORY

WARRANTY`

1 year On Mechanical on normal operation. 1 year on Electrical Parts

(With Effect from the date of Installation)

Excluding    :

(i) wear × tear parts

(ii) Breakdown of machine caused by misuse or carelessness.

INSTALLATION

Quotation including Installation of machine and operator training -

(Cost of return airfare, hotel, meals and car rental   ---- BUYER)

PAYMENT

30% DOWNPAYMENT TO CHINA. 70% BEFORE SHIPMENT. BY TT.

Price

USD65,680（Fob shenzhen）(optionals not included )